The key points of purchase wood products

Look at the style and color

The color and shape of the door is one of the main contents of the decoration style, the color of the wooden door should be fixed with the bedroom, color selection should also pay attention to close to the color of the ground and furniture, which contrasts with the color of the wall, it helps to create a sense of space level. Wooden doors to be consistent with the style of the bedroom decoration. The wood of wooden doors should also be the same with the interior furniture of wood consistent, in order to achieve the best results.

Paint

Wooden doors has a good looking because of the paint, but the paint effect also can explain wooden door factory level.
1.Paint film is attractive, which means the paint is good quality, strong polymerization, good sealing, and painting process is perfect, without cutting corners.
2.To find the reflecting angle, look at the surface of the film is smooth or not, orange peel phenomenon is obvious or not, if there are small particles protruding. If there are small particles obviously, indicating coating equipment of this plant is relatively simple, at least without full pressure dust-free spray paint room, this is a necessary equipment for the quality control of paint. If the orange peel phenomenon is quite obvious, that the film curing process does not good.
3.Fancy shape door, to see the shape of the edge of the line, especially the negative angle (which can be seen but can not touched) there is no film cracking phenomenon or not. Because the surface of solid wood composite door is stuck veneer, for non flat surface veneer, need special vacuum affixture machine. The manufacturers without these equipments have to use solid lines instead, in fact, that's the problem. The appearance is unlikely to be the same with the other part of the wood texture (veneer for precious wood), the key is solid lines in northern climates, great changes by the humidity of winter and summer, expansion and contraction, extremely easy to cause the negative film cracking angle, seriously affect the appearance.
4.The type of paint is often PU paint (polyurethane). The advantages of PU paint is easy grinding process, saving time and labor, the disadvantage is the soft film, a slight bump prone to white dent. If there is at least one layer of PE paint in the paint, it will reduce the possibility of that. PE paint (polyester paint) has the advantages of paint film is hard, strong hiding power, good transparency, better performance of veneer texture, the disadvantage is difficult to grind, the process is time-consuming and laborious, most manufacturers do not want to use the PE coating. This is also very able to show a manufacturer's attitude towards the product. Here to illustrate a point, the general promotion training will not be involved in this area, so they are not so much to deceive consumers, they do not understand the difference between these two kinds of paint.

Look at the surface flatness

1.Veneer bubble, were uneven heated in the attachment process, or uneven glue, hot press plate can solve the uneven heating problem of flat door skin.
2.Wooden surface roughness is not enough, the plate selection is relatively cheap, one can imagine the environmental performance is difficult to reach the standard.

Check whether the structure is strong

Wooden doors are finished, we can not view its internal structure. So how to check the structure is strong? Find a good installation door in the hall, pull the handle slam the door, if the structure is not good, you can see that the upper and middle of the door is not arrived at door frame at the same time, a slight quiver, the difference is very small, butcan be seen if look carefully. The door with strong structure will definitely reach the door frame at the same time, and will not vibrate.