The material difference of melamine plate

From the cost considerations, the melamine board furniture for the family multiply use of fiber board and particle board for the substrate, higher grades are used to fine wood board (solid wood core) as the substrate of melamine board. In contrast, the performance of blockboard (solid wood core) is better than the previous two. The internal structure of the blockboard is uniform, the combination force is large, the deformation is small, the surface is smooth, and the nail holding power is strong. Therefore, the blockboard used as a substrate of melamine board is more robust and durable, more able to play the characteristics of the assembly type furniture. The texture of medium density board and particle board is relatively loose, poor grip strength, lower than the cost of the former.
There is melamine press plate, can make the board surface effect, divided into smooth, rough (coarse linen, hemp, linen and cashmere) embossed surface (large and small relief). Rough and relief surface is more expansive than smooth surface, but generally used as cabinet door.

Identification of security door

1.Require vendors to produce the relevant departments of the inspection certificate.
2.Remove the cat's eye, the doorbell box or the lock handle, check the internal structure of the door body. There should be a number of reinforcing bars in the door, so that the front and back

panels of the door body are connected together. Preferably with fire, heat preservation, sound insulation function of the material as a filler, such as asbestos.
3.Check whether the use of a qualified special anti-theft lock, the lock is installed in a reinforcing steel plate for protection.
4.Process quality inspection of products, whether there are welding defects, the door and the door frame is dense.
5.The weight of the steel security door is generally not less than 40 kg.

Bedroom decoration how to choose wooden doors

The decoration of the bedroom greatly affects the quality of our sleep, affecting our daily mood. Bedroom with luxury wooden doors is a good choice, natural and beautiful and practical wooden doors are always let people relax easily. Then what is needed to pay attention to when choosing the bedroom wooden doors?

1.Decoration bedroom doors must be alert to the auxiliary material pollution of wooden doors

Research shows that half of the time every day is spent in the bedroom, the bedroom environment is safe or not directly related to human health. If the bedroom doors contain excessive harmful substances, people stay inside for a long time, breathing harmful gases, health will be affected, which is not conducive to better sleep and rest. The harmful substances of the bedroom wooden doors are not only from the plate, but also from the adhesives and coatings, and so on, some hardware parts will also release harmful heavy metal pollutants.

2.Decoration bedroom doors should be selected according to the specific circumstances

The choice of the bedroom door needs to be based on the specific circumstances of each family, while small space or poor lighting conditions of the bedroom, choose light colored wood doors can make the space look bigger, the visual look more bright. Recommended the relatively simple style, it is not recommended to choose decorative bedroom door with too many miscellaneous, so that it will make the space look more crowded. While the old man and the child's bedroom, try to choose a warm wooden door can make you feel brisk and comfortable, but also conducive to improving the quality of sleep, so the color selection should also pay more attention to. Usually the sound insulation effect also must be taken into account, ordinary wooden doors have certain noise function, but if the requirements is higher, you can choose some professional mute door on the market.

3.Choose the bedroom door which you really need

Only choose their own bedroom wooden doors, will show the best effect. That is to say, the bedroom door is chosen to be consistent with the overall style of decoration, or the beautiful wooden door will also produce a sense of alien.

Which matters needing attention to custom villa furniture

As we all know, custom furniture in the market is also very popular in the market, with the furniture brands which be able to provide relevant services also increased, so that we can have more options. However, in the choice of customized villa furniture brand, must pay attention to the evaluation, especially those consumer reviews who have used the related products, and then make a simple survey of the market, choose a higher cost performance brand from it.

The material

As we all know, the material is good or bad, can directly affect the use of custom villa furniture. Now the material is very much, everyone can screen according to the price and performance of products, do not blindly believe that the higher the price of the product, the quality is better, but also do not think the products made of many material is better.
We can according to our actual situation, screening material in a certain price range, starting from the environmental protection, bearing, wear resistance, hardness, corrosion resistance and other aspects, so as to choose the best material to have better customized villa furniture, improve our living environment, make life more delicate.

Style design

Before determining the custom furniture style villa, the owners need to have their own opinion, from the material selection and color to the overall design, need to have their own ideas, and then tell designers these design elements.
And in the custom villa furniture process, we should pay attention to the overall style of the room. If you are designing according to your own preferences, it may make products to break the original balance of design, so that it is not coordinated.

Details

For the design of customized villa furniture, first of all should pay attention to the function of the product, truly make the best use of space not only make life comfortable and beautiful, but also bring more convenience for life. And the customized villa furniture which details of the deal is in place can enrich and make the whole room is full in a certain extent, make whole space clean and tidy. Then pay attention to the environmental protection, which should be in the selection of the small details of the material, green, healthy living environment will be more popular.
If there are children, we should consider to polish sharp corners smoothly, in case of causing unnecessary harm.

See the specification and requirement of wooden door installation from five aspects

Speaking of the installation of the luxury wooden door, a lot of people think it seems very simple, in fact, the door sheet installation involves several aspects, including the door, door, hardware etc..

Door frame installation

1.Door frame joint should be tight and smooth, no black seam, lock accessories should be fixed.
2.Diagonal to be accurate, if the height of the door is 2m below, its error should be less than 1mm, if it is more than 2m, the error is less than 1.5mm.
3.Door frame installed, should be horizontal and vertical, verticality tolerance of 2mm, the level of flatness tolerance 1mm.
4.Between the door frame and the wall should be fixed with screws (not less than 3 per meter), door frame width should be above 20cm with fixed iron.
5.Between the door frame and the wall cracks with double sealed foam, foam should be evenly, dry cutting flat.

Line installation

1.Line should be installed with uniform coating door, wall fixed line, set the interface should be smooth, tight, seamless
2.There is a gap between the line and the wall, should use sealant caulking treatment.
3.After installation, the same side of the line should be in the same level, because if the wall is not normal, must ensure that the line interface level is smooth.
4.Installation of line camber tolerance within 1mm.

Door leaf installation

1.The door leaf is installed, should be flat, vertical, door and door exposed plane.
2.The door leaf open and shut without ring, seal tightly, do not swing, freely switch
3.The gap between the door frame and the door leaf, the seam under 6mm, the other three sides of 2mm, all the gap tolerance 0.5mm.

Hardware

1.The door hinge should be vertical and flat hinge screws should be installed, straight, hidden in the plane.
2.Flat hinge for doors leaf and door frame corresponding slot, slot size should be standardized and the same to the door, three edge tolerance hinge 0.5mm, assembly after the formation of seamless,

hinge opening should be flexible. Trigeminal hinge installation according to mold, the bolt should be inserted in place.
3.Door lock installation should be tightened, the lock is no different ring, the slot should be accurate and standard, size and the lock body, the lock piece is consistent.
4.Fittings installation is complete, fixed screw should be installed all, straight.
5.Door closer, handle and so on should be installed in the specified location, the installation is firm, the fixed screw should be installed all, straight, with good effect after loading parts.

Appearance

1.Door frame, door line and ground combined gap should be less than 3mm, and waterproof sealant sealing gap.
2.The gate should be loaded, smooth and uniform, open and flexible, the overall effect is good.

The key points of purchase wood products

Look at the style and color

The color and shape of the door is one of the main contents of the decoration style, the color of the wooden door should be fixed with the bedroom, color selection should also pay attention to close to the color of the ground and furniture, which contrasts with the color of the wall, it helps to create a sense of space level. Wooden doors to be consistent with the style of the bedroom decoration. The wood of wooden doors should also be the same with the interior furniture of wood consistent, in order to achieve the best results.

Paint

Wooden doors has a good looking because of the paint, but the paint effect also can explain wooden door factory level.
1.Paint film is attractive, which means the paint is good quality, strong polymerization, good sealing, and painting process is perfect, without cutting corners.
2.To find the reflecting angle, look at the surface of the film is smooth or not, orange peel phenomenon is obvious or not, if there are small particles protruding. If there are small particles obviously, indicating coating equipment of this plant is relatively simple, at least without full pressure dust-free spray paint room, this is a necessary equipment for the quality control of paint. If the orange peel phenomenon is quite obvious, that the film curing process does not good.
3.Fancy shape door, to see the shape of the edge of the line, especially the negative angle (which can be seen but can not touched) there is no film cracking phenomenon or not. Because the surface of solid wood composite door is stuck veneer, for non flat surface veneer, need special vacuum affixture machine. The manufacturers without these equipments have to use solid lines instead, in fact, that's the problem. The appearance is unlikely to be the same with the other part of the wood texture (veneer for precious wood), the key is solid lines in northern climates, great changes by the humidity of winter and summer, expansion and contraction, extremely easy to cause the negative film cracking angle, seriously affect the appearance.
4.The type of paint is often PU paint (polyurethane). The advantages of PU paint is easy grinding process, saving time and labor, the disadvantage is the soft film, a slight bump prone to white dent. If there is at least one layer of PE paint in the paint, it will reduce the possibility of that. PE paint (polyester paint) has the advantages of paint film is hard, strong hiding power, good transparency, better performance of veneer texture, the disadvantage is difficult to grind, the process is time-consuming and laborious, most manufacturers do not want to use the PE coating. This is also very able to show a manufacturer's attitude towards the product. Here to illustrate a point, the general promotion training will not be involved in this area, so they are not so much to deceive consumers, they do not understand the difference between these two kinds of paint.

Look at the surface flatness

1.Veneer bubble, were uneven heated in the attachment process, or uneven glue, hot press plate can solve the uneven heating problem of flat door skin.
2.Wooden surface roughness is not enough, the plate selection is relatively cheap, one can imagine the environmental performance is difficult to reach the standard.

Check whether the structure is strong

Wooden doors are finished, we can not view its internal structure. So how to check the structure is strong? Find a good installation door in the hall, pull the handle slam the door, if the structure is not good, you can see that the upper and middle of the door is not arrived at door frame at the same time, a slight quiver, the difference is very small, butcan be seen if look carefully. The door with strong structure will definitely reach the door frame at the same time, and will not vibrate.